Home » Shop – All Products » Ciranova Maintenance Oil Matt – Natural Elegance for Wood Floors
Ciranova Maintenance Oil Matt – Natural Elegance for Wood Floors
$176.00
Ciranova · Care for oiled floors
Refresh an oiled floor — no sanding
Ciranova Maintenance Oil Matt re-nourishes an oiled timber floor and brings a tired, dull surface back to life. It feeds fresh oil into the timber — no sanding, no recoat — and leaves a natural, clear matt look with no gloss and no colour change. It’s for oiled and UV-oiled floors only.
Product detail: Ciranova Maintenance Oil Technical Data Sheet.
Volume
1 litre
For
Oiled floors only
Finish
Natural · extra matt
Coverage
~40–60 m² / litre
Base
Solvent-based
Made in
Belgium
For oiled floors only — never on a lacquered or sealed floor
This oil is made to soak into an oiled or UV-oiled floor. On a lacquered, sealed, varnished or waxed floor it can’t penetrate or bond — it just sits on top and won’t hold. If you’re not sure what finish your floor has, test a small, out-of-the-way patch and let it dry before you do the whole floor.
Refresh, don’t renovate
Bring an oiled floor back without sanding it
Re-oiling feeds the surface and lifts a dull, dry-looking floor — far quicker and cheaper than a full sand and recoat.
Vienna Woods · a cared-for oak floor
What it’s for
Feeds an oiled floor and lifts a dull surface
An oiled floor loses its oil as it wears, and starts to look dull, dry and patchy. Ciranova Maintenance Oil Matt feeds fresh oil back into the timber so the floor looks cared-for again — without sanding it back or laying a new finish.
It leaves a natural, clear matt finish — no gloss and no colour change — and suits engineered oak and other floors finished with a penetrating oil or UV-oil. For everyday washing in between, use Ciranova Floor Soap; if a floor is badly soiled, clean it back with Ciranova Intensive Cleaner first.
Coverage
40–60m² per litre
A little goes a long way
One litre covers roughly 40 to 60 square metres, depending on how worn and thirsty the timber is. Most rooms take a single thin coat, so a bottle sees you through more than one refresh.
Drying
~4hours to dry
Give it time to harden
Touch-dries in about four hours. Leave it 12 hours before you walk on the floor, and keep water and cleaning off it for 48 hours while the oil cures.
How to use
Clean it back, oil it thin, buff it dry
Clean the floor first — lift soap residue and grime with Ciranova Intensive Cleaner, rinse with water, and let it dry so the surface is clean and dust-free.
Apply a thin, even layer of the oil and leave it to settle for a few minutes.
Rub or buff it dry with a white pad, working it into the timber. On smaller areas, wipe it on with a lint-free cloth and take off any excess.
Leave the floor 12 hours before walking on it, and keep water and cleaning off it for 48 hours while the oil hardens.
Always test the colour on a small, out-of-the-way area first — the final look depends on the timber, the sanding and how much you apply.
When to reach for it
Reach for it when
An oiled floor has gone dull, dry or patchy with wear.
You want to refresh the finish without sanding or recoating.
You’re keeping an engineered oak or oil-finished floor on a regular maintenance cycle.
Aftercare
Getting the best from it
Do
Vacuum and clean the floor back before you re-oil.
Apply it thin — a heavy coat stays tacky and won’t dry.
Buff off all the excess with a white pad or lint-free cloth.
Test the colour on a hidden patch first.
Don’t
Don’t use it on a lacquered, sealed, varnished or waxed floor — it won’t bond.
Don’t walk on the floor for 12 hours, or wet-clean it for 48.
Don’t bin oily cloths dry — soak them in water first (see safety below).
Complete the system
The Ciranova oiled-floor system
Clean it back, re-oil, and keep it washed — the routine Ciranova recommends for an oiled floor.
This is a solvent-based oil, so it’s flammable — work in a well-ventilated room, away from open flame, heat and other ignition sources, and don’t smoke while you use it. Cloths and pads soaked in the oil can heat up on their own and catch fire: lay them out flat to dry outdoors, or soak them in water, before you throw them away. Read the Ciranova safety data sheet before use.